Posted October 01, 2018 11:24:07The nails are the thing.
They make the nails.
But that doesn’t mean you have to paint every nail in your nails.
You can do a lot of different nail designs.
Here’s how to get started.
The first thing to do is choose the design you’d like to nail.
You’ll want to pick a nail that’s at least 3″ long and 2″ wide.
You want a flat design, so you can use a nail file.
If you’re going to use a file, pick a design that you can easily cut into the nail.
The first nail you nail will be the base.
The other two will be top and bottom.
It should be clear where you’ll place your nails so you don’t accidentally nail two of them together.
Here’s the template for a 3-inch wide nail design.
If you’re not happy with your nail design, you can always change it later.
Here are some options.
The nail file makes it easy to cut your nails in two.
(It makes it much easier to put the nail file through your nails and back out again.)
You can use the same nail file for both of the top and the bottom nails.
Here you’ll need a file with a length of at least 4 inches.
(This is a good size to make a template.)
You’ll also need a piece of chalk that you’ll use to line the nail cutout.
(Make sure to get one with a sharp edge.)
The next step is to add your design to the file.
Here, you’re making the top two nails.
I added a 1-inch long line to the top of the design.
It’s also important to make sure your nails are straight and parallel.
(If you’ve got a bit of nail-cutting experience, you know how to trim the edges of the nail files to get rid of the little “slices” of paper that form when you apply your nail file.)
Here’s what the template looks like.
Here are some other nail designs you can nail.
Here we’re making a 3.5-inch nail.
(The 3- inch design has been modified to fit in this template.)
The other nail design is a 4.5 inch nail.
There’s a 4-inch template for the bottom design, too.
(I had to cut it off to fit into the template.)
Here are the tips for how to nail your nails: